Chevron Left
Introduction to FPGA Design for Embedded Systems に戻る

コロラド大学ボルダー校(University of Colorado Boulder) による Introduction to FPGA Design for Embedded Systems の受講者のレビューおよびフィードバック

4.6
1,047件の評価

コースについて

This course can also be taken for academic credit as ECEA 5360, part of CU Boulder’s Master of Science in Electrical Engineering degree. Programmable Logic has become more and more common as a core technology used to build electronic systems. By integrating soft-core or hardcore processors, these devices have become complete systems on a chip, steadily displacing general purpose processors and ASICs. In particular, high performance systems are now almost always implemented with FPGAs. This course will give you the foundation for FPGA design in Embedded Systems along with practical design skills. You will learn what an FPGA is and how this technology was developed, how to select the best FPGA architecture for a given application, how to use state of the art software tools for FPGA development, and solve critical digital design problems using FPGAs. You use FPGA development tools to complete several example designs, including a custom processor. If you are thinking of a career in Electronics Design or an engineer looking at a career change, this is a great course to enhance your career opportunities. Hardware Requirements: You must have access to computer resources to run the development tools, a PC running either Windows 7, 8, or 10 or a recent Linux OS which must be RHEL 6.5 or CentOS Linux 6.5 or later. Either Linux OS could be run as a virtual machine under Windows 8 or 10. The tools do not run on Apple Mac computers. Whatever the OS, the computer must have at least 8 GB of RAM. Most new laptops will have this, or it may be possible to upgrade the memory....

人気のレビュー

KS

2020年7月30日

This is an extremely good course and I learned a lot. Thank you very much sir "Timothy Scherr " and all the people who make this a such a nice one. Also thank you very much "COURSERA" !!!

PM

2020年11月5日

This course is very basic level and I encourage all the electronics students must take this course. Thank you Timothy Scherr Sir, he explained all the concepts with detailed explanation.

フィルター:

Introduction to FPGA Design for Embedded Systems: 1 - 25 / 256 レビュー

by diemilio

2019年11月26日

by Curtis N

2018年8月15日

by arash n

2019年1月8日

by Gary F

2018年6月29日

by Aniss B

2020年3月2日

by Jose P E

2018年3月14日

by Ammon D

2019年10月9日

by Syed M

2018年9月18日

by MOHAMMED Z H

2018年4月29日

by Indu G

2019年2月21日

by Ralph W

2017年10月16日

by Guift

2018年6月7日

by Bijan K

2017年11月12日

by Patrick D

2018年2月5日

by Victor G

2019年3月5日

by Divyang T

2019年7月25日

by Alan T

2017年12月25日

by KIMBULOBBE H M T M S S

2020年7月31日

by Rafael D

2018年10月25日

by Papu M

2020年11月6日

by KADİR E

2020年11月10日

by Durga S

2019年4月23日

by Qiaoqiao G

2018年4月18日

by Sanjay A M

2020年5月5日

by Sebastian R

2018年10月22日