Chevron Left
Motors and Motor Control Circuits に戻る

コロラド大学ボルダー校(University of Colorado Boulder) による Motors and Motor Control Circuits の受講者のレビューおよびフィードバック

4.7
1,272件の評価

コースについて

This course can also be taken for academic credit as ECEA 5341, part of CU Boulder’s Master of Science in Electrical Engineering degree. This is our second course in our specialization on Embedding Sensor and Motors. To get the most out of this course, you should first take our first course entitled Sensors and Sensor Circuits. Our first course gives you a tutorial on how to use the hardware and software development kit we have chosen for the lab exercises. This second course assumes that you already know how to use the kit. After taking this course, you will be able to: ● Understand how to specify the proper AC or DC motor for a machine design. ● Integrate the motor to a machine, based on analysis of motor equations for voltage, current, torque and speed. ● Implement the motor and accompanying rotary sensor into a motor control circuit in both hardware and software. ● Add a motor and motor control circuit into a microprocessor based development kit. ● Create hardware and firmware to process motor feedback data to a microprocessor for further evaluation. You will need to buy the following components to do the two course projects based on the videos in this module. Note that if you have already purchased the PSOC 5LP PROTOTYPING KIT, you do not need to buy it again. These parts may be purchased off the Digikey web site, www. Digikey.com. Or, you may obtain the specs from the site, and purchase them elsewhere. These are the part numbers for the above table, the lab on Motor Voltage and Current Measurement. You can copy and paste them into the search engine on the Digikey web site. You need one of each except for the AA batteries (N107-ND), which you would need 3. 428-3390-ND P14355-ND FQU13N10LTU-ND N107-ND 1N5393-E3/54GICT-ND RNF14FTD1K00CT-ND P0.62W-1BK-ND Additional equipment needed: • Wire - various gauges and lengths • Breadboard • Oscilloscope – suggested models are: o PICOSCOPE 2204A-D2 available on www.digikey.com or o Digilent 410-324 | OpenScope MZ available on www.newark.com Depending on your budget, you can also investigate these models: o Hantek HT6022BE20MHz - https://www.amazon.com/dp/B009H4AYII o SainSmart DSO212 - https://www.amazon.com/dp/B074QBQNB7 o PoScope Mega50 USB - https://www.robotshop.com/en/poscope-mega50-usb-mso-oscilloscope.html o ADALM2000 - https://www.digikey.com/en/products/detail/analog-devices-inc./ADALM2000/7019661...

人気のレビュー

LL

2020年7月9日

This course and lectures deliver what is promised: about AC and DC motor.

If you are looking to learn about this subject, this is one of the best online class that you can find.

Happy learning!

RR

2020年4月9日

The course has given me a brief idea about how to choose a motor for my application. Real time application videos and laboratory exercises which really enhances the knowledge about AC and DC Motors.

フィルター:

Motors and Motor Control Circuits: 1 - 25 / 346 レビュー

by Lukas A B

2020年7月6日

by Shivali s

2020年6月29日

by Mohamed A D

2019年2月8日

by SUMATHI S

2020年6月4日

by rubiagandhi r

2020年4月10日

by Manuel C

2019年3月6日

by Vinay S

2019年11月7日

by Pablo C S

2019年9月23日

by PRASAD J S

2020年5月13日

by Sohan L B

2020年5月10日

by Abiral R B C

2020年7月10日

by S D R

2020年5月18日

by muhammad z

2020年4月20日

by Saud K

2019年10月8日

by MAURICIO R F V

2019年11月27日

by D.V.N. A

2020年8月7日

by Allirani S

2020年4月16日

by Juan d J N E G

2020年8月27日

by NTIHINYUZWA P

2020年10月16日

by ABHISHEK P

2020年6月25日

by Parimal R

2020年9月2日

by Tara c

2020年6月9日

by Mr.Vijayratna b

2020年7月17日

by Vinod R

2020年7月5日

by Vaghela H

2020年7月10日