Chevron Left
Sensors and Sensor Circuit Design に戻る

コロラド大学ボルダー校(University of Colorado Boulder) による Sensors and Sensor Circuit Design の受講者のレビューおよびフィードバック

4.6
1,051件の評価

コースについて

This course can also be taken for academic credit as ECEA 5340, part of CU Boulder’s Master of Science in Electrical Engineering degree. After taking this course, you will be able to: ● Understand how to specify the proper thermal, flow, or rotary sensor for taking real-time process data. ● Implement thermal sensors into an embedded system in both hardware and software. ● Add the sensor and sensor interface into a microprocessor based development kit. ● Create hardware and firmware to process sensor signals and feed data to a microprocessor for further evaluation. ● Study sensor signal noise and apply proper hardware techniques to reduce it to acceptable levels. You will need to buy the following components to do the two course projects based on the videos in this module. Note that if you have already purchased the PSOC 5LP PROTOTYPING KIT, you do not need to buy it again. These parts may be purchased off the Digikey web site, www. Digikey.com. Or, you may obtain the specs from the site, and purchase them elsewhere. These are the part numbers typed out, so you can copy and paste them into the Digikey web site. You will need one of each part. 428-3390-ND NHD-0216BZ-RN-YBW-ND 570-1229-ND A105970CT-ND Additional equipment needed: • Wire - various gauges and lengths • Breadboard • Oscilloscope – suggested models are: o PICOSCOPE 2204A-D2 available on www.digikey.com or o Digilent 410-324 | OpenScope MZ available on www.newark.com Depending on your budget, you can also investigate these models: o Hantek HT6022BE20MHz - https://www.amazon.com/dp/B009H4AYII o SainSmart DSO212 - https://www.amazon.com/dp/B074QBQNB7 o PoScope Mega50 USB - https://www.robotshop.com/en/poscope-mega50-usb-mso-oscilloscope.html o ADALM2000 - https://www.digikey.com/en/products/detail/analog-devices-inc./ADALM2000/7019661...

人気のレビュー

CM

2020年5月28日

This course is really tailormade and covers many aspect of sensor and sensor circuit design in minute details. The assignments and course project ensure the students engagement and learning.

NC

2020年9月16日

It was amazing experience about how the course was so professionally held .It was amazing i have learning different things right from practical to theory it absolutely brilliant.

フィルター:

Sensors and Sensor Circuit Design: 1 - 25 / 243 レビュー

by paradigminversion

2021年11月30日

by Junghee K

2019年8月27日

by Kadiri C

2019年1月26日

by Rebecca G

2019年5月13日

by Thomas H

2019年2月16日

by Carlos N G

2019年7月2日

by Sylvain G

2020年4月19日

by Md H

2019年3月6日

by Jesper B C

2020年6月10日

by Bharti r k

2020年5月17日

by Chandrashekhar M M

2020年5月28日

by tanmay n

2020年3月30日

by Manuel C

2019年2月21日

by Shane m

2019年4月4日

by Aakriti B

2019年3月19日

by Richard J

2020年2月12日

by J A P

2019年12月7日

by Enrique V

2020年4月25日

by RAFIH P

2020年6月14日

by Ahmed M A F

2020年3月9日

by akshat m

2019年11月2日

by PALLAVI M

2020年9月2日

by HASSAN B T

2020年7月14日

by Nofri W C

2020年9月17日

by Ryan C

2019年2月10日